Try-lock

Designed to suspend services from a single point suspension.
Works in conjunction with standard Zip-Clip suspensions to support from a variety of different base materials.
The range consists of two pre-determined lengths of wire with snap gate carabiners forming the termination points.

The Applications

Suitable for suspending containment and bracketry:

Cable Basket
Cable Tray
Channel Supports
Chilled Beams
Radiant Heat Panels
Plenum boxes

Safe working loads

G 10kg

S 50kg

Legs should not exceed 60 degrees
One fixing point per drop
Self leveling
Allows for side loading
Height can be adjusted at basket and not at fixing
Can be fixed to basket or tray at ground level
PVC protection sleeve preventing wire on wire friction
5 x 50 BZP carabiner hook
Eyelets in carabiner prevent accidental un-hooking of carabiner from wire
High tensile galvanised wire 1960 N/mm2 grade 7 x 7 construction
BSEN 12385 Standard
Reduces the use of studding and channel

The attachment of the Try-Lock system can be done at ground level
Clip the carabiner to one side of the basket or cable tray
Clip the other carabiner to the other side of the basket or cable tray
Pass the free end of the wire from your top suspension through the zip-clip in the direction of the arrow
Pass through the plastic protected loop of the Try-Lock and back through the zip-clip leaving 15cm of wire protruding
Always confirm engagement of the zip-clip on the wire by pushing the pin in the opposite direction to the arrows indicated
Legs should not exceed 60 degrees

Code	Description	SWL (Kg)	Qty
TRS50-200	Eyelet carabiner suspension 50-200mm spans	50	10
TRS300-400	Eyelet carabiner suspension 300-400mm spans	50	10

Try-lock

The Applications

DISCOVER ZIP‑CLIP

DISCOVER ZIP‑CLIP