Anchor-It

Designed to fix a wire suspension to a concrete ceiling.

The range consists of a predetermined length of wire from 1 metre to 10 metres with a choice of Safe Working Load.

The system consists of wire rope and zip-clip locking device with a ferruled CLA2 concrete anchor termination.

The Applications

Suitable for concrete applications including:

Safe working loads

G 15kg

S 35kg

Drill a 5mm hole to a minimum depth of 30mm
Blow the hole clean of dust and debris
Drive the anchor into the hole until the head is firmly seated against the base material. Be sure the anchor is driven to the required embedment depth
Pass the wire through the zip-clip in the direction of the arrow
Pass through or around your required suspension and back through the zip-clip leaving 15cm of wire protruding
Always confirm engagement of the zip-clip on the wire by pushing the pin in the opposite direction to the arrows indicated

Product Code	TSI	EAN	Description	SWL (KG)	Pack Qty
PLCAK1G	400807625	5060711657202	1 m concrete suspension system	15	10
PLCAK2G	401990188	5060711657219	2 m concrete suspension system	15	10
PLCAK3G	400807832	5060711657226	3 m concrete suspension system	15	10
PLCAK4G	401990191	5060711657233	4 m concrete suspension system	15	10
PLCAK5G	400807900	5060711657240	5 m concrete suspension system	15	10
PLCAK10G	401990243	5060711657257	10 m concrete suspension system	15	10
PLCAK1S	400808019	5060711657264	1 m concrete suspension system	35	10
PLCAK2S	401990285	5060711657271	2 m concrete suspension system	35	10
PLCAK3S	400808161	5060711657288	3 m concrete suspension system	35	10
PLCAK4S	401990311	5060711657295	4 m concrete suspension system	35	10
PLCAK5S	400808239	5060711657301	5 m concrete suspension system	35	10
PLCAK10S	401990337	5060711657318	10 m concrete suspension system	35	10
Other drop lengths are available as standard, up to 10 m, in increments of 1 m, please contact Zip-Clip.